|
: Dell OptiPlex GX520 User's Guide
Back to Contents Page
Dell™ OptiPlex™ GX520 User's Guide
 Removing the Computer Cover
Removing the Computer Cover
|
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. |
|
|
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover. |
- Follow the procedures in "Before You Begin."
- If you have installed a padlock through the padlock ring on the back panel, remove the
padlock.
|
NOTICE: Ensure that there is sufficient space to support the open cover—at least 30 cm (1 ft) of desk top space. |
- Slide the release latch back as you lift the cover.
- Pivot the cover up using the hinge tabs as leverage points.
- Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
|
1
|
security cable slot
|
|
2
|
cover release latch
|
|
3
|
computer cover
|
Back to Contents Page
|
